IT 
EN 
Kit S-Moove L6 GO
The kit consists of the following items. Click to view them.
Recommended retail price € 8.250 including VAT
n° 1 - "Zoned" Floor L 1-2
"Zoned" Floor
The "Zoned" Floor is suitable for vehicles where the removal of passenger seats is expected.
The "Zoned" Floor is suitable for vehicles where the removal of passenger seats is expected.
It is divided into zones that correspond to: trunk area, 2nd row seat area, and 1st row seat area. It is possible to keep one or two rows of seats by removing only the corresponding floor zone and leaving the rear zone intact.
Each zone can be further subdivided when the rows have seats that can be managed independently (e.g., 2 connected seats + 1 independent seat).
-
n° 1 - Transverse Bed
Transverse Bed
Transverse bed, fully removable with the possibility of setting up 1 or 2 places.
Fully removable bed with the possibility of setting up 1 or 2 places. Includes mattress.
With structure anchored to the "Wheel Arch Modules" or the "Bed Structure".
Suitable for vehicles that have sufficient internal width to ensure the adequate length of the bed. These are vehicles identified as Maxi: Renault Master, Opel Movano, Nissan NV400, Fiat Ducato, Peugeot Boxer, Citroën Jumper, Volkswagen Crafter, Mercedes Sprinter, Ford Transit, etc.
n° 2 - Module 20 Tall
Module 20 Tall
Module 20 x 50 x 49.2 (D x W x H)
Module 20 x 50 x 49.2 (D x W x H), suitable for containing and making available common use items, essentially designed to be placed above or in front of the wheel arch module, creating the base for a 30 or 40 module.
Designed to be moved, stacked, and internally connected.
n° 2 - Module 40 Tall
Module 40 Tall
Module 40 x 50 x 49.2 (D x W x H)
Generic module 40 x 50 x 49.2 (D x W x H), suitable for containing and making available common use items:
It can become a specific module: toilet, sink, stove if integrated with the corresponding "smart elements".
Designed to also serve as a seat and table. Designed to be moved, stacked, and internally connected.
-
n° 1 - Double Sink - Module 40
Smart Double - Tall Module
Elements for connecting storage modules.
Elements for connecting storage modules.
Used to transform two separate modules into a single module with double height.
They allow you to increase the total height of the modules from 430 mm to 860 mm.
Requires 2 "Tall Modules".
n° 1 - Stove Holder - Module 40
Stove Holder - Module 40
Includes additional shelf under the top.
- Shelf lifts from above and allows stove storage.
- Does not include stove.
Module 40 from generic to Stove.
It consists of an additional shelf below the top of the module.
The shelf can be lifted from the top and allows the stove to be stored in the module.
The top of the module, when placed in a vertical position, acts as a windscreen and splash guard.
Does NOT include stove
n° 1 - Toilet - Tall Module 40
Toilet - Tall Module 40
Elements for transforming a generic module into a WC module: platform for extracting and moving the WC.
Elements for transforming a generic module into a toilet holder module: platform for extracting and moving the toilet.
Designed to remain in the module when the toilet is inside and to be extracted when needed.
Does NOT include toilet.
n° 1 - Water System 50
Water System 50
Removable water system for distributing water both inside and outside the vehicle.
- Impianto idrico amovibile per la distribuzione di acqua sia all'interno che all'esterno del veicolo. Comprende 2 taniche da 25 Lt, pompa con interruttore a membrana (pressostato), cavo elettrico e tubo lungo 5 metri, doccetta.
n° 1 - Table-Stool
Pilar
The Table That Becomes a Stool
A Freely Positionable and Anchorable Table
A Stool When You Use the Modules as a Table
Pilar is a modular element, anchorable to the floor, usable as either a table or a stool with a footrest, and fully removable.
Made of birch plywood. The standard finish includes a clear varnish that enhances the natural look of the wood.
Some images may show floors, modules, tops or tables with protective vinyl coatings, which are available on request.
These surface films increase resistance to wear and water but are not included in the standard version.
n° 1 - Storage Tent with 4 Pockets
Storage Tent with 4 Pockets
Storage tent for windows.
Maximum width 120 cm.
Storage tent for windows.
Maximum width 120 cm, with four pockets for clothing.
The storage tent can be paired with the insulating tent.
The storage tent can be detached and removed or folded and suspended from the ceiling to minimize its bulk and leave the windows free.
Kit S-Moove L6 PRO
The kit includes all the items from the L6 GO kit, as well as the items listed below. Click to view them
Recommended retail price € 9.650 VAT included
n° 2 - Module 20 Tall
Module 20 Tall
Module 20 x 50 x 49.2 (D x W x H)
Module 20 x 50 x 49.2 (D x W x H), suitable for containing and making available common use items, essentially designed to be placed above or in front of the wheel arch module, creating the base for a 30 or 40 module.
Designed to be moved, stacked, and internally connected.
-
n° 1 - Table Stool
Table Stool
Modular element, anchorable to the floor, usable as a table or stool.
Modular element, anchorable to the floor, usable as a table or as a stool with footrest, fully disassemblable.
Closed dimensions: (WxDxH cm) 50 x 72 x 3.6
Open table dimensions: (WxDxH cm) 50 x 60 x 72
n° 2 - Storage Tent with 4 Pockets
Storage Tent with 4 Pockets
Storage tent for windows.
Maximum width 120 cm.
Storage tent for windows.
Maximum width 120 cm, with four pockets for clothing.
The storage tent can be paired with the insulating tent.
The storage tent can be detached and removed or folded and suspended from the ceiling to minimize its bulk and leave the windows free.