IT 
EN 
Kit S-Moove S2 GO
The kit consists of the following items. Click to view them.
Recommended retail price € 3.720 including VAT
n° 1 - S Floor
The S Floor
The S Floor is designed for the Mini Van range.
For vehicles with fully foldable seats, the floor features a hinged section that can rotate to stay in a vertical or horizontal position, depending on the seat layout.
It includes two Wheel Arch Panels, which are part of the bed structure.
- The S Floor is made up of walking surfaces equipped with anchor points for securing the different components of the S-Moove® System. It includes two side panels that serve multiple functions: supporting the "Longitudinal Bed," covering the wheel arches, and optionally containing the bed slats, the mattress, or other everyday items. For vehicles with fully foldable seats, the S Floor features a hinged section that can rotate to a vertical or horizontal position, depending on the seat configuration.
n° 1 - Longitudinal Bed
Longitudinal Bed
The Longitudinal Bed is designed for vans (Mini Vans and Multi Vans) with an interior width that is not suitable for accommodating a transverse bed.
- The Longitudinal Bed consists of: extensions, slats, and a mattress. The extensions are inserted into the side panels of the floor and support the slats, which in turn hold the mattress. The entire structure is fully removable
n° 1 - Low Module 40
Low Module 40
Storage Module measuring 40 x 50 x 42.2 cm (D x W x H)
Generic module designed to store and make everyday items easily accessible.
Suitable for transport in vehicles and for modular configurations.
Designed to be moved, stacked, and internally connected with other modules.
It consists of:
Positioning Base: an element for positioning and anchoring the modules to the floor.
Storage Module and Locks: a container that anchors to the base, designed to support additional stacked modules. It is secured with dedicated locks.
Closing Top: a top panel that can be positioned in three different ways.
Internal Shelves: one height-adjustable shelf and one half-shelf located just below the top.
n° 1 - Single Sink Module 40 Low
Single Sink Module 40 Low
Sink module (40 x 50 x 42.2 cm) with steel basin and water system faucet support.
Generic module integrated with a sink element. Suitable for transport in vehicles and for modular configurations.
Designed to be moved, stacked, and internally connected with other modules.
It consists of:
Positioning Base: an element for positioning and anchoring the modules to the floor.
Storage Module and Locks: a container anchored to the base, designed to support additional stacked modules. It is secured with dedicated locks.
Closing Top: a top panel that can be positioned in three different ways.
Sink: - support frame and stainless steel basin, 100 mm deep - removable support for the tap - drain fitting, hose, and water collection tank.
It is possible to opt for the version without hose and collection tank, in order to avoid the tank taking up space inside the module.
n° 1 - Water System - 10
Water System 10
Removable water system for the distribution of water both inside and outside the vehicle.
- Removable water system for the distribution of water both inside and outside the vehicle. Includes 10-liter tank, pump with membrane switch (pressure switch), electrical cable and 3-meter hose, showerhead.
Kit S-Moove S2 PRO
The kit includes all the items from the S2 GO kit, as well as the items listed below. Click to view them
Recommended retail price € 4,280 VAT included
n° 1 - Table Stool
Table Stool
Modular element, anchorable to the floor, usable as a table or stool.
Modular element, anchorable to the floor, usable as a table or as a stool with footrest, fully disassemblable.
Closed dimensions: (WxDxH cm) 50 x 72 x 3.6
Open table dimensions: (WxDxH cm) 50 x 60 x 72
n° 1 - Storage Tent with 4 Pockets
Storage Tent with 4 Pockets
Storage tent for windows.
Maximum width 120 cm.
Storage tent for windows.
Maximum width 120 cm, with four pockets for clothing.
The storage tent can be paired with the insulating tent.
The storage tent can be detached and removed or folded and suspended from the ceiling to minimize its bulk and leave the windows free.